Driveway Sealcoating


Periodically applying a sealcoat to an asphalt driveway will not only improve its appearance but will help it last longer. A sealcoat protects the driveway from the sun’s ultraviolet rays and helps prevent water from seeping through cracks, where it can contribute to freeze-thaw damage or undermining of the driveway.New asphalt driveways should be allowed to age a year or so before applying a sealcoat. Generally a recoating is only needed every three years in most areas; however, in sunny, hot climates or where the driveway is subject to heavy traffic, more frequent application may be required. Whether a new or existing driveway, the appearance of fine cracks is a clue it is time to apply a sealcoat. The graying of a driveway’s surface is another indication the asphalt is drying out.

If you are ready for a little hard labor you can tackle sealcoating yourself, and should be able to do a good job provided you follow the manufacturer’s directions and use a premium grade product. When contemplating whether to do it yourself, getting an estimate from a professional sealcoating company may help in your decision.

A professional applied sealcoat may double your cost; however, certainly less time and effort on your part will be needed. In addition, the sealcoating and crack-filling products used by most professional applicators are often better than those available at home centers.

The basic choices are either an asphalt-based product (a byproduct of petroleum refining) or coal tar (a byproduct of coal processing). Most consumer-available sealers are water-based and contain fillers, additives and asphalt. But coal tar products are generally more durable and more resistant to oil or gasoline damage. From an environmental standpoint though, asphalt products are better because they do not emit high levels of volatile organic compounds (VOCs).

Product cost alone may not determine quality, as asphalt products can be more expensive depending on the amount of additives included. The best way to determine quality may be the length of the warranty. Better sealcoat products have a five to six-year pro-rated warranty

If you decide to do it on your own, make sure your back is up to it. The amount of product required will vary depending on the type, amount of sand fillers, and the condition of the driveway. Most estimates indicate five gallons will be needed for each 250 – 400 sq. ft.

Also, consider purchasing a few extra containers to make sure you can finish the job without interruption. Under estimating the amount needed is a common mistake, which can lead to trying to stretch it out too much and ending up with a less than uniform appearance and protection.

Before beginning, all cracks over 1/8 inch need to be filled with a crack filler compatible with the sealcoat product. Next, any spot residue from oil leaks or other contaminants need to be treated and the driveway needs to be power washed. Most manufacturers recommend a squeegee type applicator, however, a special brush may be needed at any rough areas.

Extent of cracking in this driveway is beyond the point where a sealcoating will provide any significant benefit.

While some homeowners like to recoat their driveway every year to keep up its appearance, frequent resealing won’t really provide much additional protection, and may actually lead to a buildup of the sealcoat that ends up cracking or peeling.

Remember, these tips are only general guidelines. Since each situation is different, contact a professional if you have questions about a specific issue. More home safety and maintenance information is available online at

Copyright ©  DBR Franchising, LLC


Share and Enjoy:
  • Facebook
  • Twitter
  • Google Bookmarks
  • LinkedIn
  • Print
  • Digg
  • Yahoo! Buzz
This entry was posted in House Master Home Insurance and tagged , , , . Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>